Steel Structure Trestle Bridge/prefabricated Highway Steel Bridge
Hot-dip galvanization significantly enhances the durability of Bailey bridges by providing several key benefits:
1. **Metallurgical Bond and Bond Strength**:
The galvanizing process creates a strong metallurgical bond between the zinc coating and the steel, resulting in a bond strength of approximately 3,600 psi. This bond ensures that the coating becomes an integral part of the steel, rather than just a surface treatment, providing long-lasting protection against corrosion.
2. **Uniform Protection and Complete Coverage**:
The galvanized coating grows evenly across the entire surface of the steel, including edges and corners, ensuring uniform protection. This uniformity is crucial for maintaining the structural integrity of the bridge, especially in harsh environments.
3. **Abrasion Resistance**:
The galvanized coating consists of hard intermetallic layers (Gamma, Delta, and Zeta) that are harder than the underlying steel. These layers provide exceptional resistance to abrasion and impact, protecting the steel from damage during transportation, installation, and service.
4. **Predictable Coating Thickness**:
The thickness of the galvanized coating is directly proportional to the thickness of the steel being galvanized. This predictability ensures consistent protection and helps in estimating the service life of the bridge components.
5. **Long-Term Corrosion Protection**:
The galvanized coating provides long-term corrosion protection, with the corrosion rate slowing down over time. In some cases, the coating can last up to 40 years before requiring maintenance.
6. **Environmental Resistance**:
Hot-dip galvanized steel can withstand continuous exposure to temperatures up to 20°C and occasional excursions up to 275°C without affecting the coating. This makes it suitable for various environmental conditions, including marine and industrial atmospheres.
By using hot-dip galvanization, Bailey bridges manufactured by Jiangsu Zhonghai Bridge Equipment Co., Ltd. achieve enhanced durability, ensuring they can withstand harsh conditions and heavy loads while maintaining a long service life.
Specifications:
| CB200 Truss Press Limited Table |
| NO. | Internal Force | Structure Form |
| Not Reinforced Model | Reinforced Model |
| SS | DS | TS | QS | SSR | DSR | TSR | QSR |
| 200 | Standard Truss Moment(kN.m) | 1034.3 | 2027.2 | 2978.8 | 3930.3 | 2165.4 | 4244.2 | 6236.4 | 8228.6 |
| 200 | Standard Truss Shear (kN) | 222.1 | 435.3 | 639.6 | 843.9 | 222.1 | 435.3 | 639.6 | 843.9 |
| 201 | High Bending Truss Moment(kN.m) | 1593.2 | 3122.8 | 4585.5 | 6054.3 | 3335.8 | 6538.2 | 9607.1 | 12676.1 |
| 202 | High Bending Truss Shear(kN) | 348 | 696 | 1044 | 1392 | 348 | 696 | 1044 | 1392 |
| 203 | Shear Force of Super High Shear Truss(kN) | 509.8 | 999.2 | 1468.2 | 1937.2 | 509.8 | 999.2 | 1468.2 | 1937.2 |
| CB200 Table of Geometric Characteristics of Truss Bridge(Half Bridge) |
| Structure | Geometric Characteristics |
| Geometric Characteristics | Chord Area(cm2) | Section Properties(cm3) | Moment of Inertia(cm4) |
| ss | SS | 25.48 | 5437 | 580174 |
| SSR | 50.96 | 10875 | 1160348 |
| DS | DS | 50.96 | 10875 | 1160348 |
| DSR1 | 76.44 | 16312 | 1740522 |
| DSR2 | 101.92 | 21750 | 2320696 |
| TS | TS | 76.44 | 16312 | 1740522 |
| TSR2 | 127.4 | 27185 | 2900870 |
| TSR3 | 152.88 | 32625 | 3481044 |
| QS | QS | 101.92 | 21750 | 2320696 |
| QSR3 | 178.36 | 38059 | 4061218 |
| QSR4 | 203.84 | 43500 | 4641392 |
| CB321(100) Truss Press Limited Table |
| No. | Lnternal Force | Structure Form |
| Not Reinforced Model | Reinforced Model |
| SS | DS | TS | DDR | SSR | DSR | TSR | DDR |
| 321(100) | Standard Truss Moment(kN.m) | 788.2 | 1576.4 | 2246.4 | 3265.4 | 1687.5 | 3375 | 4809.4 | 6750 |
| 321(100) | Standard Truss Shear (kN) | 245.2 | 490.5 | 698.9 | 490.5 | 245.2 | 490.5 | 698.9 | 490.5 |
| 321 (100) Table of geometric characteristics of truss bridge(Half bridge) |
| Type No. | Geometric Characteristics | Structure Form |
| Not Reinforced Model | Reinforced Model |
| SS | DS | TS | DDR | SSR | DSR | TSR | DDR |
| 321(100) | Section properties(cm3) | 3578.5 | 7157.1 | 10735.6 | 14817.9 | 7699.1 | 15398.3 | 23097.4 | 30641.7 |
| 321(100) | Moment of inertia(cm4) | 250497.2 | 500994.4 | 751491.6 | 2148588.8 | 577434.4 | 1154868.8 | 1732303.2 | 4596255.2 |
Advantage
Possessing the features of simple structure,
convenient transport, speedy erection
easy disassembling,
heavy loading capacity,
great stability and long fatigue life
being capable of an alternative span, loading capacity
Product Tags:
|
|
Steel Structure Trestle Prefabricated Trail Bridge Highway Steel Bridge Images
|
